Foundry Chemicals - Indo Power Engineers

Products for Aluminum Casting Foundries

Alfine (Covering Flux)

Aldegas (Degasser)

Grainofine (Nucleant)

Diecoat (For Gravity & Pressure Die Casting)

Ti - B Tablets

Water Cooling Tower

High Quality Ferro Alloys

Low Carbon Ferro Manganes

High Carbon Ferro Manganese

Low Carbon Ferrochrome

High Carbon Ferrochrome

Ferro Silicon

Ferro Phosphorus

Ferro Silicon Manganese

Ferro Silicon Calcium

Ferro Silicon Magnesium

Ferro Molybdenum

Moly Metal

Ferro Boron

Ferro Titanium

Ferro Sulphur

High Quality Minerals

Zircon Sand

Zircon Flour

Chromite Sand

Silica Sand

Resin Coated Sand

Olivine Sand

Sand Bentonite

High Grade Carbon Additives

Graphite Granules (G.P.C.)

C.P.C

Coconut Shell Charcoal (Zero Sulphur)

Carboraiser

RPC (Raw Petroleum Coke)

Pure Metals

Molybdenium Metal

Nickle Metal

Chrome Metal

Selenium Metal

Manganese Metal

Spectrum of Advance Foundry Resin

Amicure (Coldbox resin)

Carbon Cure 101 (Co2 resin-2 part system)

Celloset (Foundry grade sodium silicate)

Finocure (3-part no bake system)

F-set (Alphaset resin system)

Korset (Single part air setting)

Kortel-75 (Premium core oil)

Mould Paint-11 (Thinner)

PF-3003 (PF resin for resin coated sand)

Celloset SS (Silicate-CO2 2part resin)

Furobond (Acid cure phenolic resin system)

Expoxy Putties & Metal Filled Compounds

Fast Setting (For Jointing And Filling blow holes and cracks of metal, wood, pattern and casting )

Steel Filled (Salvage Ci Casting & Steel Casting)

Gun Metal Filled (Fill Blow Holes)

Brass Filled (For Brass Casting)

Aluminium Filled (Aluminium Casting)

Copper Filled (For Copper Casting)

Copper, Gunmetal & Brass Based Foundries

Lead Fire (Lead Remover)

Deox Tubes (Degasser / Low Gas)

Coverbrass (Covering Flux)

Exothermic Sleeves

Zinc Rex (Zinc Remover)

Finhot Grade-NF (Exotermic Compound)

Magrex (Magnesium Covering Flux)

Lost Foam Foundries

FOAMCOAT - 99.

FOAMCOAT - AL20.

FOAMCOAT - SG100.

FOAMCOAT - HT-100.

PRODUCTS FOR C.I & S.G IRON CASTING

ADVANCE HI-TECH PRODUCTS FOR C.I & S.G IRON CASTING FOUNDRY

Finex : A laddel addition for machinability, reduction of chill to increase fluidty of the metal.
Ferrofine : A powerful scavanger & deoxidiser to increase fludity of melt.
Cupolex : A desulpheriser brick for cupola & roatry operation.
Chroman-21 : A granular laddel addition to increase strength and hardness. Small foundries can easily granular laddel addition to increase strenget and hardness. Small foundries can easily make graded cast iron.
Carbon Assitives : Pet coke, c.p.c., carboriser (90 to 93% c) g.p.c.. Coconutshell charcoal, to increase carbon precentage in the metal
Finoculex-1 : Rare earth & “ba” based innoculant. Ensure consistent chill free casting of grey & s.g. Iron
Finoculex-2 : Modern highly effective innoculant mainly based on quality ferro silicon for grey and ductile iron foundries. Excellent innoculation effect. Ensure consistent result.
Finoculex-3 (C.F.101) : Economical carbon based innoculant combined with ferro silicon. Ensure chill free casting.able.
Desulpheriser : A powerful desulpheriser powder for metal treatment in furance and ladle. Results proves decrease of sulpher Content from 0.06 to0.02 of s.g. iron melt.
Finhot-22 : A highly insulative compound to be added in the ladle and riser for maintaining temperature.
Finhot-66 : To keep metal hot for longer time in ladle and riser
Slagofix-22 : A powerful granular slag cogulant
Exothermic sleeves : A good quality, highly insulative exothermic sleeves in different sizes to keep metal hot for longer times along with Hot tops
Mould Paste-55 : Graphite / thinner based coating for mould and core
Mould Paste-22 : Graphite / water based coating for c.i. And s.g. Iron
Mould Paste -ZX : Graphite / zircon / thinner based for s.g. Iron
Koreinnculant Barnium : Rare earth based innoculant for s.g. Iron
Ferrosilicon Magnasium : 6 to 8%, 8 to 10% magnasium in different sizes for s.g. Iron
Scrap Melt : Maximum scrap addition possible in c.i. Casting
Iron Cement : Iron based cement to fill big holes in cast iron

RANGE OF LATEST MOULD & CORE COATINGS FOR FERROUS FOUNDRIES FOUNDRY

Mould Powder : Graphite / Water based coating Which Gives More coverage and finishing to C.I. & Grey Iron castings.
Mould Powder -55 : Graphite / Thinner based coating Which Gives More coverage and finishing to C.I. & Grey Iron castings.
Mould Paste-22 : Hi-tech graphite water based paste for Grey & S.G. Iron foundries.
Mould Paste -55 : Thinner / Graphite base coating paste used for C.I. & Non Ferrous foundries.
Mould Paste -33Z : Thinner / Zircon based Paste. Ensures Quality Finishing for Steel Castings.
Koreclean -1264 : A Premium Thinner / Aluminium Silicate Based Coating System
Mould Powder -66Z-1264 : Thinner / Zircon Suspension Powder for Manganese Steel and Steel Casting Foundries.
Mould Powder 101 : Water / Zircon Suspension Powder for Alloy Steel Casting Foundries.
Mould Powder -77Mn : Magnesite / Thinner Based Coating For Magnese Steel Casting
Mould Paint -44 : A slef set Air Dry Phenolic Core & Mould Paint for Superb Finishing of Castings.
Mould Paint-11 : To Make a Super Grade Foundry Paint to be mixed with Mould Paste & Mould Powders.
Mould Paint -51 : A Thinner / Graphite self igniting type Core & Mould paint

PRODUCTS FOR STEEL CASTING FOUNDRY

PRODUCTS FOR STEEL & ALLOY CASTING FOUNDRIES

Finhot-66 : Exothermic Compound For C.I. & Steel Casting
Mould Coat : Economical Mould Compound
Mould Powder -101 : Zircon / Thinner Base Mould &Core Coating For Steel Castings.
Finhot-22 : Insulative Compound For Riser & Laddel
Mould Paste -WB1 : Zircon / Water Based Paste For Mould & Core Coating.
Mould Paste -33Z : Zircon / Based Paste For Mould & Core Coating.
A.P.C.-1 : Anti Pipping Compound
Slagofix -22 : Slag Coagulant For C.I. & Steel Casting.
Dephos -11 : A Powerful Scavenger to Removes Phosphrous for metal.
Mould powder 77 MN : Magnesite / Thinner Based Coating For Magnese Steel Casting.
Mould Powder MN : Magnesite / water Based Coating For Magnese Steel Casting.Steel Casting.
Exothermic SleevesMN : A Good Quality, High Keep metal hot for Ic e Exothermic Sleeves in Different Sizes To s along with hot tops. Steel Casting.

PRODUCTS FOR STEEL CASTING FOUNDRY

SPECTRUM OF ADVANCE FOUNDRY MOULD & CORE MAKING SYSTEM

Celloset : A Perfect blend of (foundry grade speciality) silicate binder & breakdown agent at most economical rate.
Kortel -75 : A premier quality core oil set after 180 degree Heating is a economical sand binder system.
Korset : A Self setting, No bake single part core making Compound. Just add 3% Korset in sand and Make a core. Core sets within 6 to 8 hours. Easy stripping, superb finishing of cores, lowest Gas evolution, higher strength.
Finocure Part – A,B,C : A premier quality core oil set after 180 degree Heating is a economical sand binder system.
Shineset : The Newly Developed Furane resin two part system for faster production and superb finishing of casting.
F-set : The Newly Developed alpha set 2 Part No Bake process, utilizes low viscosity, modern phenolic liquid resin and hardener System to getting faster production
Emicure : The oldest PUCB (Poly Urethane Amine cold Box system. This binder system gives Large volume and high speed accurate core Production.
Carbon Cure 101 (C.F.101) : A Newly Developed Resin-Co2 Eco friendly core and mould making system give easy breakdown properties of sand exact dimension and large production os easily achievable.
Korbond -PS(C.F.101) : A Nitrogen free Phenolic resin react with acid catalyst to be use Production of steel, alloy steel casting auto component.
PF-5004 : A versatile phenolic Resin system with catalyst to make resin coated sand having good strength, Permeability & lowest gas Evolution.

RANGE OF LATEST MOULD & CORE COATINGS FOR FERROUS & STEEL FOUNDRIES

Mould Powder -22 : Graphite / Water based coating Which Gives More coverage and finishing to C.I. & Grey Iron castings.
Mould Powder -55 : Graphite / Thinner based coating Which Gives More coverage and finishing to C.I. & Grey Iron castings.
Mould Paste -22 : Hi-tech graphite water based paste for Grey & S.G. Iron foundries.
Mould Paste -55 : Thinner / Graphite base coating paste used for C.I. & Non Ferrous foundries.
Mould Paste -33Z : Thinner / Zircon based Paste. Ensures Quality Finishing for Steel Castings.
Koreclean-1264 : A Premium Thinner / Aluminium Silicate Based Coating System
Mould Powder -66Z-1264 : Thinner / Zircon Suspension Powder for Manganese Steel and Steel Casting Foundries.
Mould Powder 101 : Water / Zircon Suspension Powder for Alloy Steel Casting Foundries.
Mould Powder -77Mn : Magnesite / Thinner Based Coating For Magnese Steel Casting
Mould Paint -44 : A slef set Air Dry Phenolic Core & Mould Paint for Superb Finishing of Castings.
Mould Paint-11 : To Make a Super Grade Foundry Paint to be mixed with Mould Paste & Mould Powders.
Mould Paint -51 : A Thinner / Graphite self igniting type Core & Mould paint
Partex : Parting Agent for easy stripping of Core & Mould. Director For Core Shooter.
Finalloy Chrome & Manganese : Ladle Addition to make graded C.I. Casting.
Liquicol (Liquid/Powder) : Green Sand Additive against coal dust gives superb finishing.
Hotfix 65 : For Joining Hot Resin Coated Cores.
Korfixer -1 : Core Jointing Paste
Disulpheriser : Desulphering agent can decrease sulpher from 0.06
Dephos : Powerful dephosphering agent for C.I. and S.G. Iron Casting.
Ferro silicon Magnesium : F.S.M – (6 to 8%, 8 to 10% MG With Rare Earth) In Different Sizes.
Core Carbon 81 : CARBORISER 90% / 93%
Innoculatns : Barium, Ferrosilicon based best Quality Innuculant.

PRODUCTS FOR NON – FERROUS CASTING FOUNDRY

RANGE OF INNOVATIVE COVERING FLUXES, DEGASSERS & HI-TECH DIECOATS FOR THE NON FERROUS FOUNDRY

Coverbrass : Protective covering flux to stop heavy melting loss, removes gases and immpurities for uniform colour for copper based foundries. (Equivalent to Brasscover)
Deox Tube G-1 : Powerful Deggasser to stop blow holes in copper based foundries.
Finhot Grade -NF : Powerful exothermic compound to increase temperature of Non ferrous metals. Sprinkle in ladle or risers to keep metal hot for longer time .
Lead Fire : Modern R&D product to increase fluidity, remove limited lead & zinc from copper based alloys.
Zinc Fire : Removal of Zinc, increase fluidity and shining of Non-ferrous alloys.
Magrex : Hitech protective covering dry flux for magnesium based alloys. Stops melting loss and clean the melt.
Mould Paste 22 : Graphite / Water Based Coating for Mould And Core
Mould Paste 55 : Graphite / Thinner Based Coating for Mould And Core
AIFINE – 22 : Covering Flux For Aluminium Casting .
ALDGas – 1 : Powerful Degasser For Aluminium Alloys.
GRAINOFINE 2 : Nucleant For Aluminium Alloys.
Diecoat G-9 : White Water Base Die Coat for Gravity Die
Diecoat F-10 : Black Water Base Die Coat for Pressure
Diecoat-0-11 : Plunger Lubricant For Pressure Diecasting For Superb Finishing of Casting
Diecoat-666 : Silver Coloured Diecoat perssure Die Casting.

PRODUCTS FOR NON – FERROUS CASTING FOUNDRY

RANGE OF LATEST MOULD & CORE COATINGS FOR NON FERROUS FOUNDRY

Mould Powder -22 : Graphite / Water based coating Which Gives More coverage and fin-ishing to C.I. & Grey Iron castings.
Mould Powder -55 : Graphite / Thinner based coating Which Gives More coverage and finishing to C.I. & Grey Iron castings.
Mould Paste -22 : Hi-tech graphite water based paste for Grey & S.G. Iron foundries.
Mould Paint-11 : To Make a Super Grade Foundry Paint to be mixed with Mould Paste & Mould Powders.
Mould Paint -51 : A Thinner / Graphite self igniting type Core & Mould paint
Partex : Parting Agent for easy stripping of Core & Mould. Director For Core Shooter.
Hotfix 65 : For Joining Hot Resin Coated Cores.
Korfixer -1 : Core Jointing Paste

PRODUCTS FOR NON – FERROUS CASTING FOUNDRY

METASET EPOXY PUTTIES & METALIC COMPOUND PER SEALING, JOINTING & REPAIRING OF CASTINGS

Fast Setting : Epoxy Putties for filling blow holes of casting.
Steel Filled : Metalic Filled Epoxy Compound for filling cracks of Casting.
Gunmetal Filled : Gun Metal Base Epoxy Compound For Gunmetal Casting.
Aluminium Filled : Aluminium Base Epoxy Compound For Aluminium Casting.
Copper Filled : Copper Base Epoxy Compound.
Partex : Parting Agent for easy stripping of Core & Mould. Director For Core Shooter.
Hotfix 65 : For Joining Hot Resin Coated Cores.
Korfixer -1 : Core Jointing Paste